6 Types of Tree Removal for a Commercial Property |

You’ve probably heard that arborist and tree removal services are absolutely critical. For sure, they are vital to your safety, the health of your yard, and the trees.

However, there are various types of tree removal services available. When you require one, you may be perplexed as to which service to select. As such, in this article, we hope to assist you with that.

This blog explains when to consider removing a tree and six types of tree removal for a commercial property. The goal is to assist you in making the best decisions possible while wasting as little time as possible.

So, without further ado, let us get started.

When to Consider Removing a Tree From Your Commercial Property

What are the reasons for having a tree removed? What factors should you check to ensure you are doing the right thing? Below are some of the common scenarios:

Safety Risk

Safety is one of the obvious reasons to have your tree removed. When trees get old, they start to loosen up a bit and may collapse or drop limbs on the property or people. Unhealthy trees are vulnerable to harsh climate conditions. Falling debris may cause severe injuries.

The vast root system can attach to the structural foundation. With time, the roots overgrow and weaken the building’s foundation structure, hence making the property unstable. The tree roots can also destroy pavements and walkways, and may trip people.

Construction Constraints

Ongoing building constructions around trees cause both immediate and long-term damage. Most trees die in a few years. If 50% of the root becomes damaged during construction, you have to remove the tree immediately.

Trees growing under a power line causes construction-related problems. The trees will need pruning immediately or they’ll grow past 25ft. If left to grow taller, they pose a considerable threat, especially during rainy seasons.

Property Protection

Damaged trees pose a risk to your commercial property. The falling limbs from the trees can destroy your roofs, vehicles, and also air conditioning units. The overgrowing roots can weaken the building’s foundation and damage sewer, gas, and electric lines.

The building concrete structure is no match to growing tree roots. At times, roots can block waterways, hence causing devastating water retention. Tree removal is the only thing left to do.

Also, insects, pests, and birds tend to make trees their habitat. Pests and insects are a potential health risk.

Property Value

Big trees may add value to your property, but unhealthy tree removal will upsurge the visual appeal of your land. Besides, sick trees can pose a threat to other nearby plants by spreading disease across the property.

If trees are blocking a lovely view from your commercial property, consider removal. Removing trees that are hindering the natural beauty of the property can increase its value.

During the winter season, trees shed their leaves heavily, creating a time-consuming mess. Removing haphazardly-placed trees on the compound creates more space and enhances the design.

Tree Removal for a Commercial Property

Once you’ve determined you need commercial tree removal, there are various ways of doing so. The following discuss the various methods:

1. Felling the Tree

Felling trees is the most common tree removal technique. Felling is a traditional method that involves people cutting the base of the tree until the trunk falls. The approach is straightforward, because it only requires a chainsaw or sharp ax.

Workers also remain on the ground because there is no need to climb the tree. The technique can be a bit tricky, because you need to know how to cut the base and control where the tree will drop without damaging anything on the way.

2. Climbing

Workers climb the tree and start to chop off sections from the top. A rigging cable helps lower down the chopped branches and trunk segments.

Workers are in better control than the felling method of tree removal. But, the process is more time-consuming. The best place to implement this method is when the tree stands at the center of building structures where felling is not an option.

3. Bucket

We use a bucket truck or cherry picker in the bucket method. The bucket method applies the same principle as climbing. A bucket truck lifts the workers close to the tree instead of rigging ropes and other gears.

We recommend the bucket method if the tree is unhealthy and cannot support climbers. The bucket method will need the truck to be on-site and other special equipment. You need to plan and prepare ahead.

4. Crane

The crane method eliminates the need for workers’ direct involvement, which a full-size crane does. The cranes pull the tree from the ground. The technique also requires special equipment and prior planning.

5. Tree Stump Removal

In most scenarios, tree removal service providers do not include tree stump removal in their service list. The method requires different equipment and may bring in a sub-contractor to finish the job. The process may add cost to the process.

The stump’s diameter will determine the amount of extra cash you will chip into the process. Nevertheless, a rotting stamp is cheaper to remove than a healthy one, because the latter is more solid.

6. Tree Trunk Removal

After the tree cutting is over, the tree removal company should cut the tree trunks into smaller sections. Cutting the trunk into smaller sections makes it easier for you to move them to other areas of the property.

You may also ask the company to haul away the trunk for you. The service may cost you more.

Consider Tree Removal From Your Commercial Property

Trees are excellent for the environment, but may at times require you to remove them from your property. When considering tree removal from your commercial property, you need advice from an expert tree removal company.

At P’n’D Logging and Tree Service, we offer the best tree removal service in the industry. Our skilled arborists will assist you with one of the above tree removal methods, whichever perfectly suits your scenario.